home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Shareware Overload Trio 2
/
Shareware Overload Trio Volume 2 (Chestnut CD-ROM).ISO
/
dir44
/
fb37.zip
/
README.1ST
< prev
next >
Wrap
Text File
|
1993-12-11
|
9KB
|
158 lines
************************
IMPORTANT NOTICE
************************
Before running FastBreak for the first time, make sure that
you are familiar with the contents of this file.
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!! WARNING !!!!
!!!! DO NOT RUN SETUP FROM THE ORIGINAL DISKETTES !!!!
!!!! IN ORDER TO CONSERVE DISK SPACE THE !!!!
!!!! SETUP PROGRAM WILL AUTOMATICALLY DELETE !!!!
!!!! ITSELF AFTER RUNNING !!!!
!!!! !!!!
!!!! MAKE A WORKING COPY OF THE ORIGINAL DISKETTES !!!! DOS MANUAL UNDER DISKCOPY FOR INSTRUCTIONS) !!!!
!!!! AND PUT THE ORIGINALS IN A SAFE PLACE !!!!
!!!! See your MS-DOS manual under DISKCOPY for !!!!
!!!! instructions on making a copy. For free !!!!
!!!! replacement disks in case of an accident write: !!!!
!!!! McS Custom Software !!!!
!!!! PO Box 1032 !!!!
!!!! Fortuna, CA. 95540 !!!!
!!!! !!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
FastBreak requires the following minumum requirements:
720 KB OF FREE DISK SPACE. This can be free space on
a hard disk, two 360 kb 5.25 inch disk drives, 1
3.5 inch disk drive, or one 1.2 meg or one 1.44 meg
disk drive.
A COLOR MONITOR. This can be CGA, EGA or VGA.
YOU MUST HAVE THE FOLLOWING STATEMENTS IN THE CONFIG.SYS
FILE ON YOUR BOOT DISK OR THE ROOT DIRECTORY OF YOUR HARD DISK:
FILES = 15
BUFFERS = 25
These are minumum requirements. If the number of Files and
Buffers specified in your config.sys exceeds these numbers that's
fine. If you don't have enough files it is a simple procedure to
add the above statements to your CONFIG.SYS file. Simply load your
current CONFIG.SYS file (found in the root directory of your
hard disk or boot-up diskette) into your favorite word
processor and add the above lines. MAKE SURE YOU SAVE THE FILE
IN THE ASCII FORMAT (there will instructions on saving an
ASCII file in your word processor). DOS 5 users can use the
EDIT program that came with DOS 5. EDIT automatically saves
in the ASCII format.
To run FastBreak on two 360 kb diskettes you must have the
following files on the disk in your A: drive:
FB.EXE
FB.HLP
SETUP.EXE
TALENT.NBA
TITLE.SCN
When you run SETUP you will specify B: as your data drive and
all files created by the program will be written to B:
To install FastBreak on your hard disk from a floppy or CD-ROM
disk, log to the drive containing the FastBreak files and type
install. You will be prompted for the directory on the hard disk and
that directory will be creatd and all files will be copied into that
directory. To print FastBreak's instructions you may then type
PRINTDOC. To configure the program to your league's specifications
you may type SETUP.
******* Registering FastBreak ******
You can now order FastBreak directly from MCS by sending the
completed order form (ORDER.TXT) or the form generated by the program
itself (under EXIT TO DOS on the main menu) along with a check for $35 to:
MCS CUSTOM SOFTWARE
PO BOX 1032
FORTUNA,CA 95540
Or, you may order the program with your Master Card, Visa, American
Express or Discover Card by calling 800-242-4775 or 713-524-6394 or by
FAX to 713-524-6398. NOTE: THESE NUMBERS ARE FOR A CREDIT CARD ORDER
TAKING SERVICE ONLY. McS CANNOT BE REACHED AT THESE NUMBERS. For tech
support you may write the above address or call 707 725-6016.
Registered users get the latest release of the registered version of
FastBreak. In addition you will receive the lastest version of the
FastBreak GENERAL MANAGER'S DISK which allows you to trade players or
sign free agents.
FastBreak Fantasy Basketball (hereafter referred to as FastBreak)
is copyrighted software - it is not now and never has been in the
public domain.
Every release of FastBreak comes in two versions, the ShareWare
or Evaluation Version and the Registered Version. The ShareWare Version
of FastBreak is intended for evaluation purposes. The ShareWare Version
is fully enabled so that all areas of the program may be tested.
Registered owners get the latest version of the program and a free copy
of the program FastBreak General Manager which makes player trades and
allows you to sign free agents.
Before running FastBreak make sure that the following files are in the
drive/directory that you will start the program from:
FB.exe (FastBreak the program)
FB.hlp (the help file)
FB.doc (the manual)
SETUP.EXE (the setup program)
Talent.NBA (the file containing the NBA teams - needed only for a
league based on NBA players)
Title.scn (the opening graphics screen)
GM.EXE (registered version only - the General Manager's program)
The ShareWare Version of FastBreak may be copied and distributed to
others subject to the following conditions:
No charge may be made for FastBreak itself. Any fees collected
for the sale of diskettes containing FastBreak must be clearly
stated as being for materials and/or handling charges. The cost
of the disk containing FastBreak may not exceed $15.00.
All files included on the original distribution disk must be
included when the program is distributed or "uploaded" to a
"bulletin board". These files are:
FB.exe
FB.hlp
FB.doc
FILE-ID.DIZ
INSTALL.COM
ORDER.TXT
TALENT.NBA
SETUP.EXE
TITLE.SCN
README.1ST
McS Custom Software reserves the right to prohibit certain
individuals or companies form distributing FastBreak. If we chose to
excercise this right the individuals or companies will be notified by
certified letter.
**** WARNING ****
Before installing this or ANY new software, you should back up any
valuable data on your computer system. FastBreak has been thoroughly
tested on different systems and is believed to be reliable and
non-harmful. However, no one can ever be totally sure of the effect
a program will have on every computer. You as the user are completely
responsible for determining the fitness or usability of FastBreak
Fantasy Basketball. McS Custom Software will not be liable for
damages of any kind, including but not limited to lost sales or profits
arising from any failure of this package to perform as expected.
This program is produced by a member of the Association of Shareware
Professionals (ASP). ASP wants to make sure that the shareware
principle works for you. If you are unable to resolve a
shareware-related problem with an ASP member by contacting the member
directly, ASP may be able to help. The ASP Ombudsman can help you
resolve a dispute or problem with an ASP member, but does not provide
technical support for members' products. Please write to the ASP
Ombudsman at 545 Grover Road, Muskegon, MI 49442 or send a CompuServe
message via CompuServe Mail to ASP Ombudsman 70007,3536.